产品详情
简单介绍：
二乙烯基苯C6H4(CHCH2)2气体检测管158S
二乙烯基苯C6H4(CHCH2)2气体检测管158S ,二乙烯基苯C6H4(CHCH2)2气体检测管158S DIVINYL BENZENE 5-50ppm,日本光明理化工业株式会社从1947年开始，在气体分析领域开拓了六十余年 , 形成了驰名于世的 ” 北川 ” 式气体检测管。
详情介绍：
二乙烯基苯C6H4(CHCH2)2气体检测管158S
二乙烯基苯C6H4(CHCH2)2气体检测管158S ,二乙烯基苯C6H4(CHCH2)2气体检测管158S DIVINYL BENZENE 5-50ppm,日本光明理化工业株式会社从1947年开始，在气体分析领域开拓了六十余年 , 形成了驰名于世的 ” 北川 ” 式气体检测管。气体快速分析法 ” 北川 ” 的历史就是日本检测管的历史 。目前是世界上*大的检测管生产厂家，也是日本**家通过美国SEI的认证，欧盟的认证的检测管厂家。公司不仅有ISO9001:2000的认证，还获得了环境管理的ISO14001的认证。北川式手动气体采集器AP-20 备有采气完成指示计 , 可以清楚的判明采气是否完成 . • 有专门截留玻璃的截留槽 , 以防止检测管割尖时玻璃片飞溅 . • 有采气容积为 50 毫升和 100 毫升的两段式制动卡 . • 采气器极为小巧 , 并有便于携带的皮具包 。
Tube No.158S
1. PERFORMANCE
1) Measuring range ：5-300 ppm 2.5-150 ppm
Number of pump strokes 1(100ml) 2(200ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.5 ppm(200ml)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：White→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：15％ RSD-high : 10％
3. CHEMICAL REACTION
A polymer of Styrene is produced by sulphuric acid.
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
300
250
200
150
100
50
20
5
ppm
GAS To pump
158S STYRENE
Substance ppm Interference ppm Coexistence
Acrylonitrile FIG.1 Tafhfeec atecdc.uracy of readings is not 400 Lower readings are given.
Butadiene 3 Similar stain is produced. 5 Uneven discolouration is produced
FIG.2 and higher readings are given.
Formaldehyde 〃15 Yellowish orange stain is produced
FIG.3 and higher readings are given.
Acetaldehyde 〃350 Similar stain is produced and
higher readings are given.
Methyl alcohol The accuracy of readings is not 0.35％ Pale discolouration is produced
affected. and higher readings are given.
Ethyl alcohol 〃0.18％ 〃
Ethyl acetate 〃700 〃
Butyl acetate 〃700 〃
(NOTE)
In case of 2 pump strokes, following formula is available for actual concentration.
Actual concentration＝1/2×Reading value.
0
200
100
Acrylonitrile Butadiene
FIG.1 Influence of Acrylonitrile Styrene indicating value 〔
ppm〕
500 1000 0
200
100
FIG.2 Influence of Butadiene
Styrene indicating value 〔ppm〕
〔ppm〕? 50 100 0
200
100
Formaldehyde
FIG.3 Influence of Formaldehyde
1. PERFORMANCE
1) Measuring range ：5-300 ppm 2.5-150 ppm
Number of pump strokes 1(100ml) 2(200ml)
2) Sampling time ：1 minute/1 pump stroke
3) Detectable limit ：0.5 ppm(200ml)
4) Shelf life ：3 years
5) Operating temperature ：0～40℃
6) Reading ：Direct reading from the scale calibrated by 1 pump stroke
7) Colour change ：White→Yellow
2. RELATIVE STANDARD DEVIATION
RSD-low：15％ RSD-mid.：15％ RSD-high : 10％
3. CHEMICAL REACTION
A polymer of Styrene is produced by sulphuric acid.
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
300
250
200
150
100
50
20
5
ppm
GAS To pump
158S STYRENE
Substance ppm Interference ppm Coexistence
Acrylonitrile FIG.1 Tafhfeec atecdc.uracy of readings is not 400 Lower readings are given.
Butadiene 3 Similar stain is produced. 5 Uneven discolouration is produced
FIG.2 and higher readings are given.
Formaldehyde 〃15 Yellowish orange stain is produced
FIG.3 and higher readings are given.
Acetaldehyde 〃350 Similar stain is produced and
higher readings are given.
Methyl alcohol The accuracy of readings is not 0.35％ Pale discolouration is produced
affected. and higher readings are given.
Ethyl alcohol 〃0.18％ 〃
Ethyl acetate 〃700 〃
Butyl acetate 〃700 〃
(NOTE)
In case of 2 pump strokes, following formula is available for actual concentration.
Actual concentration＝1/2×Reading value.
0
200
100
Acrylonitrile Butadiene
FIG.1 Influence of Acrylonitrile Styrene indicating value 〔
ppm〕
500 1000 0
200
100
FIG.2 Influence of Butadiene
Styrene indicating value 〔ppm〕
〔ppm〕? 50 100 0
200
100
Formaldehyde
FIG.3 Influence of Formaldehyde